Electric motors with system and quality

The products stand for reliability, efficiency and technical maturity. A special feature is the uniform and powder-coated aluminium housing, which is used as standard for all series up to and including size 132. From size 160, grey cast iron housings are used.

The standard scope of delivery for all series includes integrated PTC thermistors for thermal monitoring and a radial sealing ring for shaft sealing.

With this sophisticated equipment and the consistent modularity across all sizes, the motors offer an economically and technically convincing solution for a wide range of applications.

4

Electric motor product ranges

Three-phase asynchronous motors up to IE4, standard

Three-phase asynchronous motors to IEC standard (EN 60034/IEC 60072) from the DA and DG series. Energy-efficient and environmentally friendly in efficiency classes IE3 and IE4. Suitable for a wide range of standard drive tasks in industrial environments. Motor protection (PTC thermistor) and radial shaft seal as standard.

IEC sizes
56 - 355
Housing design
up to size 132 aluminium, from size 160 grey cast iron
Power ratings
0.06 - 200kW
Speeds
750, 1000, 1500, 3000 rpm
Designs
B3, B5, B14, B35, B34
Protection types
IP55, IP56, IP65, IP66

The following options can be selected in the product configurator:

Special voltages, types of protection, terminal box positions, motor protection, bearings, attachments and accessories, versions/regulations

to the products

Three-phase asynchronous motors up to IE4, progressive

Three-phase asynchronous motors to IEC standard (EN 60034/IEC 60072) from the DA and DG series. Energy-efficient and environmentally friendly in efficiency classes IE3 and IE4. Suitable for a wide range of standard drive tasks in industrial environments. Motor protection (PTC thermistor) and radial shaft seal as standard.

IEC sizes
56 - 280
Housing design
up to size 132 aluminium, from size 160 grey cast iron
Power ratings
0.18 - 110kW
Speeds
1000, 1500, 3000 rpm
Types
B3, B5, B14, B35, B34
Protection types
IP55, IP56, IP65, IP66

The following options can be selected in the product configurator:

Special voltages, types of protection, terminal box positions, motor protection, bearings, attachments and accessories, versions/regulations

to the products

Three-phase motors, 2 speeds, quadr. torque

Three-phase asynchronous motors with 2 speeds for quadratically increasing load torque (fans, pumps ...) in accordance with IEC standard (EN 60034/IEC 60072) from the PAQ series. Motor protection (PTC thermistor) and radial shaft seal as standard.

IEC sizes
80 - 250
Housing design
up to size 160 aluminium, from size 180 grey cast iron
Power ratings
0.19 - 55kW
Speeds
750/1500, 1000/1500, 1500/3000 rpm
Designs
B3
Protection classes
IP55

The following options can be selected in the product configurator:

Storage, attachments and accessories

to the products

Single-phase asynchronous motors with operating capacitor

Single-phase asynchronous motors with run capacitor in accordance with IEC standard (EN 60034/IEC 60072) in efficiency class IE2. Suitable for a wide range of drive tasks in private and commercial environments. Motor protection (PTC thermistor) and radial shaft seal as standard.

IEC sizes
56 - 100
Housing design
Aluminium housing
Power ratings
0.09 - 2.2kW
Speeds
1500, 3000 rpm
Designs
B3, B5, B14, B35, B34
Protection classes
IP55
to the products

Single-phase motors with starting and operating capacitor

Single-phase asynchronous motors with running and starting capacitor in accordance with IEC standard (EN 60034/IEC 60072) in efficiency class IE2 with integrated electronic starting relays. Suitable for a wide range of drive tasks in private and commercial environments. Motor protection (PTC thermistor) and radial shaft seal as standard.

IEC sizes
71 - 100
Housing design
Aluminium housing
Power ratings
0.25 - 2.2kW
Speeds
1500, 3000 rpm
Designs
B3, B5, B14, B35, B34
Protection classes
IP55
to the products

Modularity and efficiency - convincing price-performance ratio

Spare parts and accessories

Spare parts

Spare parts with selection by product series, size and assembly.

IEC sizes
56 - 280
Product series
DA, DG, PAQ, PGQ, ES1, EY2, EL2
Assemblies
End shields, motor feet, fan blades, fan covers, terminal boxes

The following options are available in the product configurator:

Housing design, output shaft (hollow shaft, solid shaft, single and double-sided), installation position, input flanges and shaft couplings for different IEC add-on motors

to the products

Forced cooling fan

Forced cooling fan for use with variable-speed drives and for drives with heavy-duty cycles. Universally suitable for IEC standard motors for mounting in the position of the original fan cowl.

For IEC sizes
63 - 355
Protection class
IP55
Mains voltage
Multi-voltage 230V/50Hz/1ph and 400V/50Hz/3ph

The following options are available in the product configurator:

Housing design, output shaft (hollow shaft, solid shaft, single and double-sided), installation position, input flanges and shaft couplings for different IEC add-on motors

to the products

Motor clamping rails

Motor clamping rails in sheet steel design, completely galvanised. Suitable for electric motors, gearboxes, pumps ...

For IEC sizes
63 - 355

The following options are available in the product configurator:

Housing design - various base and flange designs, input flanges and shaft couplings for different IEC add-on motors

to the products

Motorised clamping slides

Motor clamping slides in sheet steel design, completely galvanised. Easily adjustable. For simple adjustment of IEC standard motors.

For IEC sizes
56 - 225

The following options are available in the product configurator:

Housing design, installation position, terminal box position, shaft design (hollow shaft, solid shaft, single and double-sided), motor protection, brake, forced cooling fan

To the products

Nameplate with QR code

... for easy reordering of motors and spare parts

Documents

Do you have any questions about our ecoDrives product range?

We will be happy to advise you:

  • Product selection for new designs and for replacement in existing systems
  • Extended options (bearings, stainless steel shafts, ATEX ...)
  • Agreement of framework contracts for faster availability of larger purchase quantities
Contact us on
+49 345 68243 70
Mon-Fri: 8-16 h
i nfo@ele ktromotorenmarkt.de