Housing version

• Slip-on version FB - as a spare part for existing gearboxes or for use with the customer's torque support

• Slip-on version with torque support - The torque support can be mounted in various positions on the threaded holes provided on the output side

• Foot guide - selection of side-mounted screw-on discs with different dimensions (see data sheet) for mounting in different positions

• Flange version - screw-on output flanges in various sizes - see data sheet for dimensions

Shaft design

As an option to the hollow shaft with keyway, single and double-sided stub shafts with keyway can be used. The stub shafts are fitted with a retaining ring. For dimensions and fits, see data sheet.

Installation position

The installation position is required to determine the quantity of lubricant. The designations for the various installation positions can be found in the following illustration.

Input flange for IEC add-on motor

Selection of available flanges for the attachment of IEC standard motors. Variants:

a) for B14K (flange with threaded holes, small version)

b) for B5 (flange with through holes)

- Note: Select suitable coupling for input shaft as required -

Acoplamiento para motor complementario IEC de eje de entrada

Módulo de acoplamiento patentado y robusto para seleccionar adaptadores para diferentes diámetros de eje de entrada.

- Nota: -Seleccione la brida de entrada IEC adecuada para el eje de entrada según sea necesario.

Asignar el diámetro del eje según el diseńo IEC